About Fusion Metro
Be inspired by Austex Fusion, custom printed fabrics... where form meets function and design is more than decoration.
Fusion has been designed with high performance in mind, especially for commercial interiors.
Using the latest technology in waterproof polyester base fabrics, Fusion guards against spills and stains and is totally anti-microbial. All Fusion prints are bleach cleanable and
fire retardant making them the perfect choice for hospital or aged care environments.
Printed width140cm - 142cm
STAIN REPELLENT & WaterproofMoisture Barrier
Pattern repeatV: 13cm H: -
COMPOSITION & WEIGHT
Surface finish – Stain repellent Fluorocarbon C6 technology.
Kinder to the environment – PFOA/PFOS free.
Back coating (Waterproof) – Water based Polyurethane rubber coating, heavy metal free.
Test method AS 2001.2.25 (12kPa) Martindale Abrasion Method – 84,000 rubs
Tested to Australian standards AS 1530.3
Spread of Flame Index : 0
Smoke Developed Index : 5
I.M.O Standards A.652 (16 )
*Fire test certificates available upon request
Treated for bacterial protection resistant to bacteria growth – AATCC 100-2102
Tested to Australian standards AS 2001.4.11
Class 4-5 – No change of colour
Acceptable bleach cleaning – 1 part bleach 10 parts water & rinse thoroughly.
High concentration of bleach or long term exposure to bleach not recommended.
COLOURFASTNESS TO LIGHT
Tested to Australian standards AS 2001.4.21-2006
Final Rating 4
Fusion is suitable for indoor use only. Protect from direct sunlight.
Fusion fabrics are free of potentially harmful levels of Formaldehyde, heavy metals,
PFOA, PFOS, Phthalates and Phenols. Fusion fabrics can be recycled
Water Resistance Hydrostatic Head ATCC 127-2008 – 120cms
Tear strength ASTM D2261-1 (Tongue Single Rip) – Length 180N Width 418 N
Tensile strength ASTM D5034-2009 (Grab Method) – Mean breaking force 2000 N
Seam slippage ASTM D4034-92 No seam slippage Warp 228N, Weft 223N
Pilling resistance ASTM D3511-2005 – No pilling
*Test certificates available upon request.
STAIN RESISTANT ISO 105 A03
Water Based Removal of – After 24 hours
Blood (Artificial) 5
Urine (Artificial) 5
Tomato sauce 5
Sun tan Lotion 4-5
• Class 5 – complete removal
• Class 4 – Good removal
• Class 1 – No removal
Waterproof upholstery fabrics, suitable for Heavy Commercial and Healthcare applications.
CARE & MAINTENANCE
Regular maintenance – Vacuum fabric regularly to remove crumbs, dust and dirt to avoid build up.
Spills – Soak up spills as quickly as possible using dry absorbent cloth.
Stains – Most stains can be cleaned using a damp cloth. For persistent stains use a warm soapy
water solution. Moderate scrubbing with a soft bristle brush and soapy solution will help loosen
soiling from the fabric surface. It is very important to remove all soap residue with clean water.
Fusion can also be cleaned with a bleach solution (1 part bleach 10 parts water) rinse all residue.
Do not use solvent based cleaners. Failure to follow cleaning instructions may permanently stain
and reduce the life of the fabric.