Recacril Marine

From the harsh Australian outdoors, to the rigours of marine conditions, Recacril has you covered. Recacril's 100% solution dyed acrylic fabric is designed for all marine covers providing you and your boat protection from the elements. The superior woven construction provides a breathable fabric that allows air to circulate, creating a cooler more comfortable under cover environment. With an extensive selection of colours there is certainly a shade that's right for you. For more information about our range please contact Austex Fabrics.

Outdoor Mould & Mildew Resistant Water Resistant Breathable
ROLL LENGTH 40m & 60m FABRIC WEIGHT 300gm ROLL WIDTH Please see below


20 Colours

Full Specifications


100% Solution Dyed Acrylic




RECACRIL 250cm x 40m

RECACRIL 200cm x 40m

RECACRIL 152cm x 60m



Face finish: INFINITY provides long lasting protection, ani-stain, rot-proof and water resistant

Weight: 300gsm ± 5%

Water Column: ≥300 mm (ISO 20811)

Oil Repellency: ≥5

Water Repellency: ≥5

Tensile Strength Wrap: 135 daN / 5 cm ± 5%

Tensile Strength Weft:  85 daN / 5 cm ± 5%

Tear Strength Wrap: 4.5 daN ± 10%

Tear Strength Weft: 3.5 daN ± 10%

Colour Fastness 7-8

infinity - advanced fabric protection

Recacril fabrics are treated with an advanced nanoparticle process to ensure the long lasting quality of the fabrics. The nanoparticles completely cover the surface of the fibres forming a permanent barrier which protects the fabric from dirt build up and a wide variety atmospheric agents. The long term stability of the INFINITY treatment delivers exceptional water and oil repellency.




Recacril products carry a 5 year limited warranty. This warranty protects against rot, mildew and discoloration typical in normal conditions. It does not apply against any deterioration of any kind due to abusive use, accidental burns, negligence, vandalism, perforations or stains due to environmental pollution.


care & cleaning

Proper care and cleaning should be taken to ensure the life of Recacril outdoor fabrics. For regular care and maintenance, the excessive dirt should be brushed from the fabric using a soft bristled brush, the fabric should then be sprayed with warm water (not exceeding 100ºF/40ºC) and air-dried. Periodically the fabric should under go a more thorough cleaning. Again brush fabric with a soft bristled brush, spray with warm water then apply a gentle natural soap, rinse thoroughly and air dry. Do not use harsh detergents


* further performance specifications upon request